The mistake that people exist in the choose and buy of furniture and use.

The mistake that people exist in the choose and buy of furniture and use.

When many customers see a product in a furniture store, the first question they ask is it made of solid wood? As soon as you hear a negative answer, turn around and walk away. Actually, this is the reason that they lack understanding to MODERN board type furniture.

The modern board type furniture corresponding to traditional solid wood furniture is centered with artificial board. With THE MOST COMMONLY USED MEDIUM FIBER BOARD FOR, IT IS WITH WOODINESS FIBER OR OTHER PLANT FIBER FOR RAW MATERIAL, JOIN THE ADHESIVE SUCH AS RESIN, ACCORDINGLY, REAL WOOD CLOSES AN EDGE, STICK VENEER IT IS THE PRACTICE OF BOARD TYPE FURNITURE HIGHEST GRADE, ALTHOUGH IMPORT ADVANCED European FURNITURE ALSO IS SUCH. Real wood is used in the small local such as wooden bar, seal edge commonly only. On the other hand, whether it is traditional furniture or modern furniture, the wood used is obviously divided into high, medium and low grades because of its material, texture, resources and other factors. Low grade solid wood, its value is inferior to high-grade veneer. Especially A LOT OF MEDIUM AND LOW GRADE SOLID WOOD, BECAUSE DEHYDRATE THE REASON THAT TREATMENT DOES NOT PASS A STANDARD (FURNITURE USES WOOD TO ASK KILN TO DRY NORMALLY, RELATIVE MOISTURE CONTENT IS IN 10%-12% BELOW), AFTER MAKING IT FURNITURE, THE CHANCE OF DEFORMATION AND BURST IS VERY BIG. And high-grade solid wood furniture is often expensive.

Anyhow, the biggest advantage of plate type is superior to solid wood generally on mechanical property. The reason why customers have this mentality, is not completely wrong, “no aldehyde is not a board”, there is no aldehyde board.

Tell OBJECTIVELY, FROM “BEDROOM ENVIRONMENTAL PROTECTION” LOOK, THE VOC CONTENT OF REAL WOOD IS FAR UNDER PLANK. From the point of view of “global environmental protection”, the use of plates to alleviate the shortage of resources to a certain extent, is conducive to sustainable development.

Modern wood furniture with solid wood and wood veneer is also a lot, the current Guangdong market common are as follows:

1. Mahogany, black walnut, walnut is one of the best quality wood, mainly produced in North America and Europe.

The heartwood of mahogany is usually light reddish-brown and has a beautiful characteristic stripe pattern in the diameter section. Domestic walnut, lighter in color. Black walnut is light black brown with purple, string section for the beautiful large parabola pattern (mountain grain). Black walnut is very expensive, and furniture is usually made of veneer, rarely solid wood.

2, cherry, imported cherry wood is mainly produced from Europe and North America, light yellow brown wood, elegant texture, string section for the medium parabola pattern, between small circle grain. Cherry is also a high-grade wood, and furniture is usually made of veneer, rarely solid wood.

3, beech, the beech wood here is to point to beech, with Chinese traditional furniture in “south beech north elm” beech wood is two different things. The beech wood is bright and pale yellow in color, with dense “needles” (wood rays), and has a mountain grain in the rotary cut. Imported European beech has fewer defects and is much better than domestic beech. Imported ZELkova wood BELONGS TO HIGH-GRADE LUMBER IN HOME, commonly used veneer, solid wood also uses as dining chair AND small square.

4, maple, maple color light yellow, hill grain, the biggest feature is a “shadow” (local luster is obvious). Maple is a mid-range wood, and both veneer and solid wood are common.

5, birch, birch color light yellow, easy to distinguish the characteristics of the “water line” (black line). Birch is also a mid-range wood, and both solid and veneer wood are common.

6, rubber wood, the primary color is light yellow-brown, there are messy small rays, the material is light and soft, it is a low-grade solid wood. Businessmen more called it “oak”, it is the act of fishing in troubled waters. Real oak is more expensive. European white oak has elegant texture, while North American red oak has no mountain grain. Both of them are hard and heavy, and their appearance, structure and material are not in touch with rubber wood.

Other such as pine, fir, oak, paulownia, etc., all belong to the furniture of relatively low grade with material.

The development of modern wood furniture has formed a large market pattern with various styles, complete varieties and complete grades. A diversified market offers a wealth of choices, but it also creates the problem of mixing the good with the bad. As a customer, make sure to keep your eyes open when buying.

Solid wood is used at the variety with less material and local more, AND PRECIOUS WOOD USES SOLID wood RARELY. For example, CHAIR OF REAL WOOD EAT IS more COMMON, BUT IT IS commonly IN high-grade WITH imported BEech, OF MIDDLE GRADE WITH BEECH OF MAPLE, BIRCH, HOMEBRED, BE USED TO CONCEAL, HAVE TO PREVENT.

Face MATERIAL OF CONTEMPORARY BOARD TYPE FURNITURE IS VERY MUCH, AMONG THEM VENEER AND STICKER ARE VERY COMMONLY USED, BUT GRADE DIFFERS COMPLETELY. Veneer furniture is rich in natural texture, beautiful and durable, but the price is relatively high, and sticker furniture is easy to wear, afraid of water, can not withstand collision, but the price is low, belongs to the popular products. A few wear degree is not big, not near water furniture varieties also give priority to with sticker, such as shoe cabinet, bookcase and so on.

The CUSTOMER PATRONIZES FURNITURE STORE, CAN SEE ON PRICE CARD SUCH AS “WALNUT GROUND ARK”, “CHERRY WOOD TEA TABLE”, “BEECH WOOD DINNING CHAIR” WAIT FOR EXPLANATION. At this time, it is crucial to figure out whether it is solid wood, veneer or sticker. Solid wood, STICK VENEER CAN BE CALLED “CHERRY WOOD FURNITURE”, BUT STICKER CAN ONLY BE called “CHERRY wood grain furniture”, otherwise belong TO the move OF fish eye mixed beads.

Solid WOOD — WOOD GRAIN, WOOD RAY (IF HAVE TO SHOW NORMALLY IS “NEEDLE”) CLEARLY VISIBLE, MORE OR LESS SHOULD HAVE A FEW NATURAL BLEMISH (WOOD KNOT, WOOD SPOT, BLACK LINE, etc.). The natural connection between longitudinal and cross sections should be evident in the grain of the two interfaces of the same solid wood, whether it is a board or a lath.

Veneer – wood grain, wood ray clear. There should also be natural flaws. Because the veneer has a certain thickness (0.5mm or so), when making furniture, two faces face the interface, usually do not turn, but each stick a piece, so the wood grain of the two interface should not be connected normally.

Sticker — WOOD GRAIN, WOOD RAY IS CLEARLY VISIBLE, EVEN IF IT IS IMPORTED HIGH-GRADE PAPER, even wood defects can also be copied, but with natural wood or different, appear more false. Sticker furniture is prone to crack at the corners. In addition, because the thickness of wood grain paper is very small (0.08mm), it will be directly wrapped at the junction of the two planes, resulting in the two interfaces of wood grain is connected (usually longitudinal section).